EVERY RIDE	WEEKLY
o Inflate tires to pressure on sidewall o Inspect tires for nicks or cuts – if you can see cords replace the tire o Check handlebars and stem for tightness/cracks o Check quick release skewers on both wheels to insure they are tight o Check that wheels are centered in the frame o Check that brake quick releases are closed and brakes are centered.	o Wipe frame with dry or damp cloth. Check for cracks at tube junctions o Test brakes and shifting for adjustment. o .
MONTHLY (OR AFTER RIDING IN RAIN*)	EVERY 6-9 MONTHS
o Wash bike completely with soap and water* o Clean and lube chain* o Lightly lube brakes/derailleur* o Wax frame (if painted). o Inspect spokes, hubs, headset and bottom bracket adjustment and tightness. o Check accessory bolt tightness (water bottle, rear bottle holder, computer, etc mounts) o Inspect saddle, seatpost clamp, aero bar, base/handlebar, and seatpost binder bolt for tightness and condition	o Tune-up including: Ø Inspect chain, replace if worn – use chain check tool Ø Replace tires if necessary Ø Grease all metal/metal contact surfaces – don’t grease carbon/metal contact points (carbon seat posts or stems) Ø Clean/lube cables/housings
ANNUALLY
o Complete overhaul including: Ø Inspect sealed bearing units. Ø Clean, grease and adjust all loose bearing units. Ø Replace cables/housing Ø Replace brake pads Ø Re-tape handlebars Ø Replace tires/tubes